ZapCharger Pro is an intelligent charging solution that combines state of the art power electronics hardware with the cloud solution ZapCloud and provides a smart charging system for the future. ZapCloud monitors, balances and optimizes the load between charging stations.
ZapCharger Pro regularly receives new software updates with new features and functionalities.
Charging stations are connected to our unique ZapCloud technology, which enables us to meet all future challenges. ZapCloud is the brain behind our smart charging system and monitors, balances and optimizes load between charging stations at all times. ZapCloud is based on Microsoft’s Azure technology, which ensures a safe, fast and scalable platform.
The features of ZapCloud are continually improved and, along with updates over the Internet, comprehensive APIs, real-time overview, reporting features and more, we’re ready to deliver tomorrow’s charging station today.
Dimensions and weight H: 392 mm, W: 258 mm, D: 112 mm
Weight: approximately 5 kg (including backplate)
Max charging current and power
7.36 kW* at 32A single phase
22 kW* at 32A three phase (applies only to TN networks)
Built-in 3 x 40A type C fuses
IEC 62196-2 Type 2 Female
Earth fault protection
Built in RCD type B
Calibration and self-test are performed prior to start of every charge cycle. The RCD is automatic reset by unplugging the charging plug.
Limits the inrush current at the start of charging.
eMeter Integrated in the charging station with an accuracy of +/-1 % on current and voltage. This enables the user to check the actual power usage. In an installation, the consumption report can be used to distribute the cost based on use.
Theft protection The front cover of the ZapCharger Pro can only be opened with a special tool. The charging cable can be permanently locked with the charging station.
In a system with other identical charging stations, the units will select the least loaded phase for one phase charging or use all three phases for 3-phase charging.
Load distribution In a system with other identical charging stations, the power available in the installation will be shared between the units by adjusting the phase current and phase distribution dynamically.
Communications interface and cloud connection/network
WiFi 2.4 GHz, IEEE 802.11 b/g/n (channels 1-11)
PLC – HomePlug Green PHY®, 10 Mbit/s
Identification and configuration
Bluetooth Low Energy (BLE 4.1)
*32A current is available, but limited by the temperature build up inside the charging station.